Mini（SL7）Series

Easy-to-use machine specialized for welding thin plates

The Mini (SL7) series is a specialized machine for welding thin plates. Users can choose from three models depending on the plate thickness and material. The bead shape can be adjusted using the fine adjustment knob on the front panel. The maximum output is high enough, reaching 190 amperes, while the continuous use currents are 120 amperes for CO₂ welding and 100 amperes for MAG welding.

* Please use argon gas containing 5 % to 20 % carbon dioxide gas for MAG welding.

Smooth arc start

The slow-down start method enables continuous welding as well as tack welding and intermittent welding with a smooth arc start. Furthermore, low spatter welding has been achieved.

Simple operation with a single handle

The optimal welding conditions can be set by simply rotating the output setting handle to obtain a stable arc.

Wire feeder designed for ease of handling (Mini 160)

The Mini 160 comes with a 6 m long cabtyre cable for ease of handling. The wire feeder with casters can be moved to any location. A window installed on the wire feeder allows users to easily check the remaining wire amount, facilitating timely replacement.

Environmentally friendly feature in addition to the safe and secure structure

This series has adopted a safety structure design that is rated IP21 under the International Electrotechnical Commission (IEC) standards by improving the robustness and dustproof property of power sources. The structure prevents small animals from entering during storage. Furthermore, this series has been developed with energy saving taken into consideration. Its energy saving circuit is activated when the torch is switched off after welding is finished.